Posts Tagged ‘Mariner’

Slice of History: Mariner Mars 1964 Solar Panel Test

Tuesday, September 30th, 2014

By Julie Cooper

Each month in “Slice of History” we feature a historical photo from the JPL Archives. See more historical photos and explore the JPL Archives at https://beacon.jpl.nasa.gov/.

Mariner Mars 1964 Solar Panel Test
Mariner Mars 1964 Solar Panel Test — Photograph Number 293-6725Bc

“Most space projects live nine lives on the test bench before they are allowed one life in flight.”* The Mariner Mars mission was on a tight schedule in 1964, so testing was not quite as extensive as it was for other missions. A full-size temperature-control model and a proof-test model went through a series of environmental and vibration tests in the 25-foot space simulator at NASA’s Jet Propulsion Laboratory and other test facilities. This photo was taken in June 1964, outside of the Spacecraft Assembly Facility at JPL. In this unusual outdoor setting, the solar panel test took place in a large plastic tent.

After testing was completed, two spacecraft and a spare (the proof-test model) were partly disassembled, carefully packed and loaded on moving vans for a trip to the Air Force Eastern Test Range in Cape Kennedy, Florida. They were inspected, reassembled, and tested again before launch.

*To Mars: the Odyssey of Mariner IV, TM33-229, 1965.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL’s Library and Archives Group.


Slice of History: Granite Oil Slip Table

Tuesday, February 5th, 2013

By Julie Cooper

Each month in “Slice of History” we feature a historical photo from the JPL Archives. See more historical photos and explore the JPL Archives at https://beacon.jpl.nasa.gov/.

Granite Oil Slip Table
Granite Oil Slip Table — Photograph Number P-2784Ac

In 1963, spacecraft vibration tests were conducted in the Environmental Laboratory at NASA’s Jet Propulsion Laboratory in Pasadena, Calif. A slab of granite, coated in oil, provided a smooth and stable base for the magnesium slip plate, test fixture and Ranger 6 spacecraft mounted on it. There were vibration exciters (shakers) on each end, capable of more than 25,000 pounds of force. The horizontal fixture at left was used for low frequency vibration testing, and the equipment was capable of testing along all three spacecraft axes.

During the 1960s, Ranger, Surveyor and Mariner spacecraft were developed, built and tested at JPL. Because of the heavy use, a similar but smaller test fixture was used for vibration tests on spacecraft components and assemblies. Building 144 still contains test facilities, but this equipment was removed and the room now contains an acoustic chamber.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL’s Library and Archives Group.