Posts Tagged ‘rockets’

Slice of History: Cookie Cutter Missile Propellant

Wednesday, September 7th, 2011

By Julie Cooper

Each month in “Slice of History” we feature a historical photo from the JPL Archives. See more historical photos and explore the JPL Archives at https://beacon.jpl.nasa.gov/.

Cookie Cutter Missile Propellant
Cookie Cutter Missile Propellant — Photograph Number 381-490

The ORDCIT Project at NASA’s Jet Propulsion Laboratory was a research and development program about long-range jet propelled missiles. Under a contract with the Army’s Ordnance Department, a series of solid propellants were developed and tested. This photo shows a neoprene based formula referred to as ORDCIT 29, created in 1945.

Ingredients were mixed and formed into a sheet using a small roller mill. The uncured sheet was laid on a table and cut into disks, using a tool that looked like a large cookie cutter. The disks were stacked and wrapped in a neoprene liner. This cylinder was then placed in a mold and compressed. The locked mold was placed in an oven at high temperatures to vulcanize the charge and fuse the propellant and liner into one solid piece.

Twenty-one of these restricted-burning solid propellant cartridges were tested at various temperatures and various chamber pressures. The results were promising, and Progress Report No. 4-25 recommended more extensive testing.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL’s Library and Archives Group.


Slice of History: Low Temperature Propellant Tests

Monday, May 16th, 2011

By Julie Cooper

Each month in “Slice of History” we’ll be featuring a historical photo from the JPL Archives. See more historical photos and explore the JPL Archives at https://beacon.jpl.nasa.gov/.

liquid propellant jet
Low Temperature Propellant Tests — Photograph Number 6-8

It was 1943 and JPL was at the beginning stages of rocket motor research and development.  Over the next decades, JPL would design and test rocket motors with a variety of sizes and propellants.  This small (50 pound thrust) liquid propellant jet unit was immersed in a bath of ice and salt in order to test the ignition properties of the propellants at temperatures near 0°F. 

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL’s Library and Archives Group.