Posts Tagged ‘space history’

Slice of History: Freeway Tunnel Simulator

Thursday, October 6th, 2011

By Julie Cooper

Each month in “Slice of History” we feature a historical photo from the JPL Archives. See more historical photos and explore the JPL Archives at https://beacon.jpl.nasa.gov/.

Freeway tunnel simulator
Freeway Tunnel Simulator — Photograph Number P-20673A

In October 1978, this photo was taken of a freeway tunnel simulator, which was used to study the air quality in freeways that were partly covered by buildings, streets or parks in an urban area. The Highway Intermittent Tunnel Simulator (HITS) project was carried out at NASA’s Jet Propulsion Laboratory under a contract with the Federal Highway Administration, Department of Transportation. A series of reports from this project were written to assist highway planning and design.

The simulator used electric motors to power two adjustable speed belts traveling in opposite directions, with 75 scale model automobiles attached. They could travel at about 40 “mph” (to scale) along a 110-foot straightaway. A gas was introduced into the tunnels to simulate exhaust fumes. Concentration and dispersion of the gas were measured as the automobiles moved through the tunnels. Test parameters such as distance between openings, type of traffic dividers and traffic speed were varied to see how they affected the air flow patterns.

At left is Bain Dayman, the HITS project manager. At right are Howard Jongedyk, FHA contract manager; Curtis Tucker, facility design engineer; and Robert Baxter, a contractor with AeroVironment, Inc., Pasadena. Most of the people working on this project were part of the Civil Systems Engineering Section at JPL.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL’s Library and Archives Group.


Slice of History: Cookie Cutter Missile Propellant

Wednesday, September 7th, 2011

By Julie Cooper

Each month in “Slice of History” we feature a historical photo from the JPL Archives. See more historical photos and explore the JPL Archives at https://beacon.jpl.nasa.gov/.

Cookie Cutter Missile Propellant
Cookie Cutter Missile Propellant — Photograph Number 381-490

The ORDCIT Project at NASA’s Jet Propulsion Laboratory was a research and development program about long-range jet propelled missiles. Under a contract with the Army’s Ordnance Department, a series of solid propellants were developed and tested. This photo shows a neoprene based formula referred to as ORDCIT 29, created in 1945.

Ingredients were mixed and formed into a sheet using a small roller mill. The uncured sheet was laid on a table and cut into disks, using a tool that looked like a large cookie cutter. The disks were stacked and wrapped in a neoprene liner. This cylinder was then placed in a mold and compressed. The locked mold was placed in an oven at high temperatures to vulcanize the charge and fuse the propellant and liner into one solid piece.

Twenty-one of these restricted-burning solid propellant cartridges were tested at various temperatures and various chamber pressures. The results were promising, and Progress Report No. 4-25 recommended more extensive testing.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL’s Library and Archives Group.


Slice of History: Low Speed Wind Tunnel

Monday, July 11th, 2011

By Julie Cooper

Each month in “Slice of History” we feature a historical photo from the JPL Archives. See more historical photos and explore the JPL Archives at https://beacon.jpl.nasa.gov/.

Low Speed Wind Tunnel
Low Speed Wind Tunnel — Photograph Number 383-6109Bc

In December 1974, this photo was taken of the Low Speed Wind Tunnel. NASA’s Jet Propulsion Laboratory had 21-, 20-, and 12-inch wind tunnels that were very well documented, but an April 1967 report about JPL wind tunnels does not mention this facility and very little is known about it. It appears in 1961 drawings of building 80, which was next door to the main wind tunnel building but it may have been relocated years later. The March 1968 JPL telephone book indicates that there was a Low Density Wind Tunnel in building 183, room 601, belonging to the Fluid Physics Section. The section number prefix for this image indicates that it was photographed for the Research and Advanced Concepts Section, but the photo was taken at the request of Paul Massier of the Structures and Dynamics Section. Massier was seen in the June “Slice of History” blog taken in the anechoic chamber.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL’s Library and Archives Group.


Slice of History: Anechoic Chamber

Wednesday, June 8th, 2011

By Julie Cooper

Each month in “Slice of History” we’ll be featuring a historical photo from the JPL Archives. See more historical photos and explore the JPL Archives at https://beacon.jpl.nasa.gov/.

Anechoic Chamber
Anechoic Chamber — Photograph Number 383-5765Ac

This aerodynamic noise facility, also called an anechoic chamber, was used to study the noise generating mechanisms in supersonic and subsonic jets in the early 1970s. It was housed at NASA’s Jet Propulsion Laboratory in building 57 (which no longer exists) located next door to the wind tunnel that was in building 79 at the time. The large round opening in the wall is an exhaust silencer inlet. Standing next to it is Paul Massier, co-author of a technical report about this chamber. On the right is a support structure for microphones. Fiberglass wedge blocks cover the ceiling and walls, which were mostly reinforced concrete. Spaces were left open to allow for observation windows and instruments to record test data. There were also openings in the walls that allowed air to flow into the chamber to replace the air forced out during tests.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL’s Library and Archives Group.


Slice of History: Low Temperature Propellant Tests

Monday, May 16th, 2011

By Julie Cooper

Each month in “Slice of History” we’ll be featuring a historical photo from the JPL Archives. See more historical photos and explore the JPL Archives at https://beacon.jpl.nasa.gov/.

liquid propellant jet
Low Temperature Propellant Tests — Photograph Number 6-8

It was 1943 and JPL was at the beginning stages of rocket motor research and development.  Over the next decades, JPL would design and test rocket motors with a variety of sizes and propellants.  This small (50 pound thrust) liquid propellant jet unit was immersed in a bath of ice and salt in order to test the ignition properties of the propellants at temperatures near 0°F. 

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL’s Library and Archives Group.


Slice of History: Ranger Midcourse Motor

Monday, April 4th, 2011

By Julie Cooper

Each month in “Slice of History” we’ll be featuring a historical photo from the JPL Archives. See more historical photos and explore the JPL Archives at https://beacon.jpl.nasa.gov/.

Ranger Midcourse Motor
Ranger Midcourse Motor — Photograph Number 384-5117B

Engineer Ted Metz proudly showed off the Ranger midcourse correction motor in a photo similar to this one that appeared in the May 1965 issue of Lab-Oratory, the JPL employee newsletter. “Since few Lab employees have seen the Ranger and Mariner midcourse propulsion unit, we show here the rocket motor portion of the system held by Propulsion project engineer, Ted Metz. This 50-pound thrust motor utilizes hydrazine fuel and has successfully corrected the trajectories of the Mariner R, Mariner IV and Rangers VI through IX spacecrafts.”

From 1961 to 1965, there were six Ranger flights that failed for various reasons and three very successful ones (Rangers 7, 8, and 9). Mariner R (based on the Ranger spacecraft, also called Mariner 2) had flown by Venus, and Mariner 4 was on the way to Mars.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL’s Library and Archives Group.